The ITW Dynatec Cold Glue application machines and equipment are used by companies across the globe to apply cold glue to their products and packages. Click on the links below to learn more about the full line of cold glue applicator systems from ITW Dyantec:
|
|
|
 |
Dynacold High Speed Glue Applicator
- Two millisecond cycle time
- Robust ball and seat design along with the elimination of dynamic seals result in minimized wear and extended life
- Stainless steel construction and proven modular components
- Adhesive application pressures to 600 psi (40 bar) with fluid viscosities to 6000 centipoise
|
|
 |
DynaCold Mini Cold Glue Applicator Systems
The Dynacold Mini cold glue applicator system is a smaller, lighter-weight version of our successful Dynacold Series high-speed electric valves. The "Mini" retains all the capabilities of its larger sibling while providing more flexible installation options.
|
| |
|
 |
ITW Dynatec Macon Electric Valve
- Cycle Time Approximately 6ms
- Fluid Pressure to 450psi
- Fluid Viscosity to 6,000 cps
- Multiple Configurations:
- Contact/Non-Contact
- Single/Multi Orifice
- Nozzle Plate
- Right Angle Applications
- Used in High-Flow Requirements
|
|
|
|
| |
|
 |
ITW Dynatec Dynacold Slot Die Electric Module
- High Duty-Cycle Electric Modules
- Cycle Time Approx. 3ms
- Fluid Pressure to 450 psi
- Fluid Viscosity to 3000 cps
- 24VDC Coils
- Continuous or Intermittent Applications
- Widths to 18 inches (457mm)
- Coating Weights of 10 to 100 g/m2
|
|
 |
ITW Dynatec DynaSpeed Slot Die
- Excellent Pattern Cut-Off
- Widths to 210mm (8.25")
- Web Speeds to 300M/min (1000fpm)
- Robust Construction for Extended Life
- Applications Include Windowing, Labels, & Web Converting
- Infinite Pattern Variability
- 4 Millisecond Cycle Time
- 8 Independent Slot Sectors Offer Ultimate Flexibility
- Fluid pressures to 600psi, viscosities to 6000cps
- Optional bracketry for easy mounting
|
|
|
|
|
|
 |
DH-12 Non-Contact Applicator
- 0.010" to 0.040" Orifices
- 1 to 4 Beads
- Straight or 90 degree
- 24VDC Pneumatic Solenoid
- Viscosities to 1,000cps
- Fluid Pressures to 100psi
- Cycle Speed = 20ms
|
|
 |
DH-12 Contact Applicator
- .031" Orifice
- Zero Cavity
- 24VDC Pneumatic Solenoid
- Viscosities to 1,000cps
- Fluid Pressures to 100psi
- Cycle Speed = 20ms
|
|
 |
CV-16/UNI C Pneumatic Applicator
- Zero Cavity Nozzle
- 0.3 to 1.5mm Orifices
- Viscocities to 2,500cps (CV-16) 6,000cps (UNI C)
- 24VDC, 115VAC or 230VAC Solenoids
- Fluid Pressures to 400psi
- Cycle Speed = 50ms
- Long and Short Nozzle Versions
|
|
|
|
 |
CA30 Slot Die Applicator
- Unique "Snuff-Back" Design
- Fluid Pressure to 1,000psi
- Fluid Viscosity to 8,000 cps
- 24VDC, 115VAC or 230VAC Pneumatic Solenoid
- Coating Weights of 20-200 g/m2
- Widths to 18 inches (457mm)
- Primarily Used in Continuous Applications
|
|
|
|
|
 |
CS-22 Pneumatic Spray Applicator
- Cone or Fan Caps
- 0.3 to 1.5mm Orifices
- 24VDC, 115VAC or 230VAC Solenoids
- AZuto Atomizing Air Shutoff
- Fluid Pressures to 400psi
- Cycle Speed = 60ms
|
|
|
|
|
 |
Dittberner, Macon, Dynacold Product Family of Glue Applicaiont Machines
ITW Dynatec - Original Equipment Manufacturer for Dittberner, Macon and DynaCold side-seam gum extrusion products and Glue Application Mahcines.
|
|
 |
Envelope Gum Box Conversions
- No Gum Slinging Mess
- Reduced Set-Up Times
- Paper Savings (Reduced Side Tab Width)
- Accurate Pattern Repeatability
- Increased Production Speeds
|
|
 |
Fluid Delivery System 1:1 and 2:1
- Pre-Assembled 1:1 Diaphragm Pump/Filter/Fluid Regulator
- 2:1 Fluid Delivery System
- Built-In By-Pass
- Fluid Pressure Regulation via Air Pilot
- Stainless Steel and Inert Plastics Wetted Parts
|
|
 |
ITW Dynatec Folder Gluer Application Equipment
- Flexible Installation Options
- Low Cost of Ownership
- Precise Pattern Placement
- High Speed Electric Valves
|